Furuno NAVNET TZ2 TZTL12F - How to Display the Navcenter Weather Data

13. WEATHER OPERATIONS
13-4
6. Tap the data model from [Model] in the [NAVCenter Download] section. (The op-
tions are [USA] and [Worldwide].)
7. Drag the slider in [Forecast Days] to select how many days’ data to download.
8. Turn on the items to receive, from [Wind] to [Plankton].
9. For [Sea Surface Temperature], set the following menu items.
[Weather Color Transparency]: Adjust the degree of transparency for the weath-
er overlay. Use a large figure to increase the degree of transparency.
[Auto SST Color Scale]: Activate this feature to adjust the SST color scale auto-
matically according to the sea surface temperature.
[Minimum Value]: Set the minimum value for the SST color when [Auto SST Col-
or Scale] is deactivated.
[Maximum Value]: Set the maximum value for the SST color when [Auto SST
Color Scale] is deactivated.
10. Tap the close button on the title bar to finish.
11. Open the weather display, then tap the screen to show the pop-up menu. Tap [Get
Latest Wx].
The notification bar at the top of the screen flashes "Weather Update in Progress"
during the downloading. If the downloading was successful, the message " DOWN-
LOAD SUCCEEDED" appears. Tap [OK] to finish.
13.2.3 How to display the NavCenter weather data
The NavCenter data display provides forecast data that includes [Wind], [Waves],
[SST] (sea surface temperature), [Cloud], [Rain], [Pressure], [500mb], [Air Temp],
[Currents], [Altimetry], [Plankton].
Home
Center Vessel
esterday 20
Tomo
oday 21
To