14. AIS, DSC MESSAGE
14-6
How to display the detailed information for an AIS target
Tap the AIS target on the AIS list then tap [Detail]. The name of the AIS is shown in
the title bar and navigation data appears in the [TARGET INFO] section.
How to find an AIS target on the chart plotter display
Tap the AIS target on the [AIS] list, then tap [Find On Chart]. The target is placed at
the center of the chart plotter display.
How to edit an AIS nickname
1. On the [AIS] list, tap the AIS target to edit its nickname.
2. Tap [Edit Nickname] to display the software keyboard.
3. Enter the nickname, then [] to finish. You can use a maximum of 20 alphanumer-
ic characters.
4. Tap the close button on the title bar to finish.
14.10 AIS SART
When an AIS SART is received (in-
cluding re-received ones), the mes-
sage "AIS SART Alarm" appears
flashing in the Status bar. Tap the
Status bar to acknowledge the mes-
sage. Then, the AIS SART is put at
the center of the screen and the pop-up shown above appears. To set the AIS SART
as destination, tap [Goto] on the pop-up.
FURUNO
Goto
To Next Page
Loading...
