Furuno NavNet TZtouch2 TZTL12F - Wireless LAN Settings

15
15
You can connect to the internet with the wireless LAN signal to download weather information and to
connect to an iPhone, iPod, iPad, or Android
TM
device.
Note:
This procedure is not available from a monitor connected to the HDMI OUT2 port (TZT2BB only).
Wireless LAN Settings
How to connect to an existing LAN
Connect to the existing LAN to download weather data or update the software.
Home screen
H
H
Select [When Necessary], then tap “<”.
Select [Connect to existing LAN], then tap “<”.
X
X
XXX
XXX
XXXX
XXX
XXX
XXXX
Tap network required.
Enter the name of the network, then tap [OK].
ON