card that you are transferring these files to. After the files are
transferred, set this program micro SD card aside for now.
4. Now open the contents of the second folder, Part 2. You should see
the same contents as below. Transfer these folders and files to the
root directory of a USB Flash drive. Make sure it is a clean Flash
drive (nothing else on it).
These folders and files contain updated, internal sounder software,
world base charts, world 3D data, world satellite photos, eGuide, US
SiriusXM Marine Zones, and new Canadian SiriusXM Marine Zones.
Note: Due to the internal sounder update, both Part 1 and Part 2
updates must be completed. Do not update Part 1 without then
updating Part 2.
5. With the MFD power off, remove the microSD chart card from the
rear slot.
6. Insert the microSD software update card (Part 1) containing the OS
and App into the rear slot of the TZTL12F/15F.
Chart slot with cover installed Chart slot without cover .
7. Turn on the TZTL12F/15F. (Press and release power key.)
To Next Page
Loading...
