Furuno NAVnet TZtouch2 - How to Delete a Point (Incl. Route Point) on a Route; How to Remove a Point from a Route; How to Extend a Route

5. ROUTES
5-5
3. Move the route point to the new position by dragging the route point or tapping the
new position.
4. Tap [End Move] at the top right-hand corner of the screen.
5.3.3 How to delete a point (incl. route point) on a route
You can delete a point on a route.
1. Tap the point to show the pop-up menu.
2. Tap [Delete]. The selected point is deleted, and the succeeding route points are
renumbered.
Note: If the point tapped at step 1 is a point icon, only the point icon is erased. To
erase the route point, do steps 1 and 2 again.
5.3.4 How to remove a point from a route
You can remove a point from a route.
1. Tap the point to remove to show the pop-up menu.
2. Tap [Remove]. The selected point is removed from the route, and the succeeding
route points are renumbered.
5.3.5 How to extend a route
You can extend a route from the last route point on the route.
1. Tap a route leg to display the pop-up menu.
2. Tap [Extend].
3. Tap a position. A light-blue line with arrow runs from the last route point to the se-
lected position.
4. Repeat step 3 to enter more route points, if necessary.
5. At the last route point, tap [End Route] at the top right-hand corner of the screen
to complete the route and save the route to the routes list.
22
11
44
33
22
11
44
1
1
3
3
2
2