5. ROUTES
5-18
5.14.3 How to change the polar wind file
Your NavNet TZTouch2 comes with a pre-installed polar wind file. This file contains
data for sailboats, helping to improve sailing performance, by applying the data to the
laylines. Polar files can be downloaded from the MyTimeZero
™
cloud service and im-
ported to the NavNet TZTouch2.
1. From a your PC (internet connection required), access the following site (without
quotation marks) “https://furuno.mytimezero.com/#/tzt2/polars”.
2. Login to your MyTimeZero
™
account.
3. Download the required polar file and save the file to a USB flash memory.
Note: SD cards and microSD cards cannot be used.
4. Connect the USB flash memory to the TZTouch2 USB cable.
5. On the TZTouch2, open the home screen, then tap [Settings][Files]. The Files
menu appears.
6. Tap [Import Wind Polar]. The list of available polar wind files appears.
7. Tap the file you want to import, then tap [OK].
8. Check that the select file’s name appears in the menu, directly below [Import Wind
Polar].
9. Tap the close button to finish.
5.15 Routes Menu
This section provides descriptions for the items in the [Routes] menu not previously
mentioned.
[Default Route Color]: Select the color of the routes. The options are red, blue,
green, yellow, magenta, orange, cyan, or black & white.
[Route Thickness]: Select the thickness of the routes.
To Next Page
Loading...
