Furuno NAVnet TZtouch2 - How to Select Echo Trail Color; How to Select Echo Trail Shading; How to Show, Hide or Cancel an Active Route

6. RADAR
6-19
6.16.5 How to select echo trail color
1. At the home screen, select [Settings].
2. Select the [Radar] menu.
3. Set [Trail Color], then select desired trail color.
6.16.6 How to select echo trail shading
The afterglow of the target trails can be shown in a single tone or gradual shading.
1. At the home screen, select [Settings].
2. Select the [Radar] menu.
3. Set [Trail Shade], then select [Single] or [Multi] as appropriate.
6.17 How to Show, Hide or Cancel an Active Route
You can show, hide the active route on the radar display. Open the [Layers] menu then
turn [Routes] on or off.
Target
Target
[Multi] trail[Single] trail