1. SYSTEM INTRODUCTION
1-12
How to turn the power off
Tap the power switch to show the [Power & Brilliance] window.
Tap [Power Off This Equipment] or [Power Off Network], then tap [OK]. 15 seconds
after the screen goes blank, the power turns off. (The power is on for this 15 seconds.)
Note 1: If you cannot turn off the power as shown above, or the screen has frozen,
push and hold the power switch until the screen goes blank, wait two seconds, then
release the switch.
Note 2: Do not turn off the power during the start-up. Wait until the start-up is complet-
ed before you turn off the power.
Note 3: The screen refreshes slower in low ambient temperature.
Tap either of
these two.
Closes the
window.
To Next Page
Loading...
