ii
SYSTEM CONFIGURATION
NAVpilot can be controlled with the rudder reference unit or without it (Fantum Feedback
TM
). For
details of Fantum Feedback
TM
, see section 1.7.
12-24 VDC
PROCESSOR UNIT
FAP-7002
CONTROL UNIT QTY
FAP-7001/7011: MAX. 6*
1
FAP-7021: MAX. 2
RUDDER REFERENCE UNIT
*
2
FAP-6112
DISTRIBUTOR FAP-6800
SOLENOID
VALVE
PC (for serviceman)
EXTERNAL BUZZER
NAV EQUIPMENT
(NMEA 0183)
HYDRAULIC LINEAR DRIVE
HEADING SENSOR
PG-700
SHIP'S
STEERING
SYSTEM
REMOTE CONTROLLER:
DIAL TYPE: FAP-5551, FAP-5552
BUTTON TYPE: FAP-6211, FAP-6212
LEVER TYPE: FAP-6221, FAP-6222
DODGE TYPE: FAP-6231, FAP-6232
*
1
: Any combination of FAP-7001 and FAP-7011
is available. Also, FAP-7021 can be connected
at the end of series.
*
2
: Not required for Fantum Feedback
TM
.
REMOTE CONTROLLER
REMOTE CONTROLLER
REMOTE CONTROLLER
REMOTE CONTROLLER
: STANDARD
: OPTION
: USER SUPPLY
EVENT SWITCH
NAV EQUIPMENT
(NMEA 0183)
CANBUS EQUIPMENT
(NMEA 2000)
JUNCTION BOX
FAP-7822
Select one
CONTROL UNIT
FAP-7001
CONTROL UNIT
FAP-7011
CONTROL UNIT
FAP-7021
CONTACT SIGNAL IN
CONTACT SIGNAL OUT
To Next Page
Loading...
