4
2.3 Wiring
Connect the cable assy. (MJ-A7SPF0005-020C) and gateway unit to the IPS interface unit as
shown below.
Connection with the processor unit FAP-7002
Connect the cable assy. (MJ-A7SPF0005-020C) to TB1 (power) and TB7 (NMEA0183 port 2) of
the processor unit as shown in the procedure which follows.
Ground wire
(IV-1.25sq.)
Cable Assy.
(MJ-A7SPF0005-020C, 2m)
To processor unit FAP-7002
To the EVC system
Gateway unit
IPS interface unit IF-700IPS
TB1
䋨
Power
䋩
Cable entrance of the processor unit
To Next Page
Loading...
