Furuno NAVpilot-700 - Power Assist Mode

2. STEERING MODES
2-34
2.12 Power Assist Mode
The power assist mode, available with the Accu-Steer FPS 12V/24V type drive, cus-
tomizes manual steering to your own preferences. The mode is available during the
safe helm mode and the STBY mode. The indication “PA” appears at top of the screen
when the mode is active.
How to set the power assist mode
1. Open the menu in the STBY mode..
2. Use the Course control knob to select the [OTHER] menu then select [SAFE
HELM/P.ASSIST SETUP].
3. Use the Course control knob to select [POWER ASSIST] then push the knob.
!
"
20 10 5 5 10 20
"
SETCSE
T
323°
323°
RUDDER
RUDDER
0°
!
Autopilot display 2 (NAVpilot-711, NAVpilot-720)
20 10 5 5 10 20
HDG T
323°
0°
323°
Autopilot display 1 (NAVpilot-700)
PA indication
[PA]
[PA]
SAFE HELM/P.ASSIST SETUP
SAFE HELM: ON
RETURN DELAY 5 SEC
SAFE HELM RESPONSE
POWER ASSIST: OFF