2.2 Setting of NAVTEX menu
2-12
6. Printer Mask (Default: All Receive)
This is the setting of the stations and message types to be outputted to the printer.
To print a received message, set this to other than “Off” in [MENU] -> System ->
Printer. In case of NX-700A, set it to “NX-700A” and in case of NX-700B, set it
according to the connected printer type (Invert or Upright).
Reference:
When a received message list is displayed and “Print” is executed by pressing the
[PRINT] key, all the messages in the list are printed. When a received message is
displayed and “Print” is executed, the displayed messages alone is printed.
Related setting:
[MENU] -> NAVTEX -> Local Channel
[MENU] -> System -> Printer
[518]
Station
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Message
ABCDEFGHIJKLMNOPQRSTUVWXYZ
[490] (or [4209.5])
Station
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Message
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Printer Mask
[ ] [ ] MOVE
[ENT] EDIT [MENU] RETURN TO MENU
To Next Page
Loading...
