2.2 Setting of NAVTEX menu
2-14
2. Local Channel (490kHz/4209.5kHz)
This is the setting which local frequency, 490 kHz of 4209.5 kHz, to be received.
When to “INS” is selected in [MENU] -> NAVTEX -> Receiver Mode, this item is not
displayed.
Related menu operation:
1) Switch between “Local” and “518 kHz” by [<] and [>] keys on the received
message screen.
2) [MENU] -> NAVTEX -> User Select Station & Msg
3) [MENU] -> Service -> Edit Station List
4) [MENU] -> Service -> Test
5) [MENU] -> Service -> Rcv Monitor
6) [MENU] -> Initialize1 -> Demo Mode
7) [MENU] -> Initialize1 -> Rx Test
8) [MENU] -> Initialize1 -> Available Rcv Station
9) [MENU] -> Initialize2 -> Serviceman Test
10) [MENU] -> Initialize2 -> Rcv Mon+NMEA Test
3. Auto Print
This is the setting of printing of the received message.
- All: Automatically print all received messages.
- User Select: Automatically print only messages specified in [MENU] -> NAVTEX
-> User Select Station & Msg
- Off: Received messages are not printed automatically.
Reference:
When a received message list is displayed and “Print” is executed by pressing the
[PRINT] key, all the received messages are printed. When a received message is
displayed and “Print” is executed, the displayed message is printed.
Related setting:
[MENU] -> NAVTEX -> User Select Station & Message
To Next Page
Loading...
