2.2 MF/HF (400W) system
2-25
-J3E: Transmit a voice signal from the microphone, or a modulated
signal with a 1500 Hz tone signal by setting [TONE] to ON and
pressing PTT switch.
-TLX: Transmit with NBDP in FEC-Selective mode.
5. After finishing the output power adjustment, register the power data by pressing
[ENT] key.
2.2.2 DSC-60 system setting
This setting is made in the same way as that of MF/HF (150/250W) system. For this
setting refer to Page 2-11.
2.2.3 DP-6 system setting
This setting is made in the same way as that of MF/HF (150/250W) system. For this
setting refer to Page 2-15.
To Next Page
Loading...
