2.3 FELCOM 12 system
2-26
2.3 FELCOM 12 system
Fig.2.3.1 FELCOM 12 System
1) System setting of FELCOM 12
1. Press [F8] key and then press [2] key to open System Setup menu.
Fig.2.3.2
2. Make following settings.
*System Date & Time YY-MM-DD
*Preferred NCS AUTO
*MES Operation Mode INMARSAT-C
*Nav port INT or EXT
- INT: When installed internal GPS board.
- EXT: When connected external GPS data.
*Active port DTE 1
*Message Output Port DTE1
*EGC Output Port DTE1
Printer
(PP-510)
Terminal
(IB-581)
Key board
COM1
DTE1
Printer
key
COM. unit
(IC-212)
DIS.Alert uint
(IC-302)
DIS.Alert uint
(IC-302)
Rcved call unit
(IC-303)
DMC1 DMC2
RCV
BZ
ANT
NMEA in
NMEA
NMEA out
24V-2
24V-2
24V-2
FURUNO
Antenna unit
(IC-112)
(To distributor)
or
GN-78
Option
To Next Page
Loading...
