4-14
4. If you want to send a proposal, press
to select RE-SEND and press the [ENT] key.
***
Send message
***
COM. FREQ : NO INFO
DSC FREQ : 12M-INTL
GO TO ALL VIEW
STATION ID :
001234567
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
CALL TYPE : INDIVIDUAL
5. Prepare individual message and press the [CALL] key to send. If the receiving station
accepts your proposal, you can begin communications.
Manually acknowledging individual call with “ABLE”
1. When an individual call is received, the alarm sounds and the display looks like the one
below.
Individual request
call received.
FROM COAST:
001234567
ROUTINE
TELEPHONE CH 12034
STOP ALARM
2. Press the [CANCEL] key to silence the alarm, and the display changes as shown below.
JUL-23-1999-23:00:00 ECC: OK
INDIVIDUAL REQUEST
FROM COAST:
001234567
ROUTINE
TELEPHONE CH 12034
*
Received message
*
ANSWER
34
ALL VIEW
3. Press
to select "ANSWER" and then press the [ENT] key.
***
Send message
***
TO COAST :
001234567
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
CALL TYPE : ABLE
ACKNOWLEDGEMENT
DSC FREQ : 12M-INTL
GO TO ALL VIEW
ABLE
UNABLE
To Next Page
Loading...
