EasyManua.ls Logo

Furuno SC-130 - SPECIFICATIONS OF SATELLITE COMPASS SC-70;130; General System Specifications; Display Unit Specifications; Interface and Port Specifications

Furuno SC-130
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FURUNO
SC-70/130
SP - 1 E7282S01D-M
SPECIFICATIONS OF SATELLITE COMPASS
SC-70/130
1 GENERAL
1.1 Receiving frequency 1575.42 MHz (GPS/GALILEO), 1602.5625 MHz (GLONASS)
1.2 Tracking code C/A code (GPS), E1B (GALILEO), 1OF (GLONASS)
1.3 Positional accuracy (dependent on ionospheric activity and multipath)
GPS 10 m approx. (2drms, HDOP<4)
DGPS 5 m approx. (2drms, HDOP<4)
WAAS 3 m approx. (2drms, HDOP<4)
MSAS 7 m approx. (2drms, HDOP<4)
1.4 Ship’s speed accuracy (SOG)
0.2 kn rms (tracking satellites 3 or 4)
0.02 kn rms (tracking satellites 5 or more)
1.5 Ship’s speed accuracy (VBW, speed on ground)
2.0% of ship’s speed or 0.2 kn whichever is the greater
(tracking satellites 3 or 4)
0.2% of ship’s speed or 0.02 kn whichever is the greater
(tracking satellites 5 or more, at antenna position)
0.2% of ship’s speed or 0.08 kn rms
(tracking satellites 5 or more, at another position)
1.6 Course accuracy
SC-70 0.4° RMS
SC-130 0.25° RMS
1.7 Course resolution 0.1°, 0.01° or 0.001° (select from menu)
1.8 Attitude resolution 0.1°, 0.01° or 0.001° (select from menu)
1.9 Rate of turn 0.1°/s, 0.01°/s or 0.001°/s (select from menu)
1.10 Tracking bearing 40°/s
1.11 Position fixing time 90 s approx. (typical)
1.12 Attitude accuracy Pitch/ Roll: 0.4° RMS
2 DISPLAY UNIT
2.1 Screen 4.3-inch color LCD, 95.04 mm (W) x 87.12 mm (H)
2.2 Resolution 480 x 272 dots (WQVGA)
2.3 Brilliance 600 cd/m
2
typical
2.4 Contrast 17 levels
2.5 Display mode Heading, Nav data, Rate of turn and Speed (Non-IMO mode only)
2.6 Visible distance 0.65 m nominal
3 INTERFACE (JUNCTION BOX)
3.1 Number of ports (junction box)
IEC61162 (NMEA0183) IEC61162-2: 1 port, IEC61162-1: 8 ports (I/O: 4, O: 4)
External beacon input (DATA5 port):
RTCM SC-104 V2.3 (RS-485), ITU-R M823
CANbus 1 port
AD-10 4 ports, for heading output
RS-485 1 port, for display unit connection
LAN 2 ports, Ethernet, 100Base-TX, RJ45 connecter
(for IEC61162-450 and maintenance)

Table of Contents

Related product manuals