Furuno SC-130 - Page 33

1. INSTALLATION
1-19
TB7 WAGO connector (6-pin, TTYCSLA-4)
TB8 WAGO connector (9-pin, TTYCSLA-1Q)
TB9 WAGO connector (9-pin, TTYCSLA-1Q)
TB10 WAGO connector (5-pin, M12-05BFFM-010/020/060)
5 RDx_H RX data (Hot) TD/RD4 TB4
6 RDx_C RX data (Cold) TD/RD3 TB5
7 GND Drain wire TD/RD2 TB6
Pin
no.
Connection
(signal)
Description Remarks
1 TD1_A TX data NMEA(Ver1.5/2.0/3.0/4.0)
IEC61162-2
2TD1_B TX data
3 RD1_A RX data
4 RD1_B RX data
5 ISO_GND Isolating ground
6 GND Drain wire
Pin
no.
Connection
(signal)
Description Remarks
1 DATA_3A RS-485 Data output in AD-10 format.
2 DATA_3B
3 SHIFT_3A Shift output in AD-10 format.
4SHIFT_3B
5 DATA_4A Data output in AD-10 format.
6 DATA_4B
7 SHIFT_4A Shift output in AD-10 format.
8SHIFT_4B
9GND
Pin
no.
Connection
(signal)
Description Remarks
1 DATA_1A RS-485 Data output in AD-10 format.
2 DATA_1B
3 SHIFT_1A Shift output in AD-10 format.
4SHIFT_1B
5 DATA_2A Data output in AD-10 format.
6 DATA_2B
7 SHIFT_2A Shift output in AD-10 format.
8SHIFT_2B
9GND
Pin
no.
Connection
(signal)
Description Remarks
1 Shield CAN_Shield
2 NET_S Power input +9 V DC to +16 V DC
3 NET_C CAN_GND
4 NET_H CANbus Data I/O (Hot)
5 NET_L CANbus Data I/O (Cold)
Pin
no.
Connection
(signal)
Description Remarks