Furuno SC-130 - How to Connect the Remote Display Unit (Option)

1. INSTALLATION
1-23
1.5.7 How to connect the Remote Display Unit (option)
Connect the RD-50 to the SC-70/SC-130 referring to the connection diagram below.
RD-50 connection
(For details, see the RD-50 Operator’s Manual OME-44530)
RD-20 Connection
(For details, see the RD-20 Operator’s Manual OME-44540)
Remote display RD-50
21 213456
2 134
TB1
TB4
TB2
TB3
1
2
TB1
+
-
IV-1.25 sq
ɸ 4
TTYCSLA-1/
TTYCSLA-1Q
(Max. 30 m)
To ground terminal
on hull
Sensor signal
(NMEA 0183, IEC61161-1)
to Junction Box SC-701
To ship mains
12 to 24 VDC
DPYC-1.5
1 2 11 10 9 8 7 6 5 4 3 2 1
DPYC-1.5
TTYCSLA-1(Max. 100 m)
IV-1.25 sq
ɸ 4
To ground terminal
on hull
Ground terminal
To Remote Control Unit
Sensor signal
(NMEA 0183, IEC61161-1)
to Junction Box SC-701
To ship mains
12 to 24 VDC