2. OPERATION
2-19
2.12 How to View the Connected Devices
The [DEVICE LIST] shows up to 51 devices connected to the same CANbus network.
You can also view details for each displayed device.
To view the [DEVICE LIST], press the LIST button to cycle through the [LIST] screens.
Note: The [DEVICE LIST] is updated each time it is accessed. If a device is added to
the network while the [DEVICE LIST] is open, close, then re-open the [DEVICE LIST]
to show the newly added device.
How to interpret the device list
How to interpret device details
Select the device whose details you want to view, then press X. the device details ap-
pears at the center of the screen.
No.
Indication
name
Description
1DATUM, OS
coordinates,
Calculation sta-
tus, [HDG],
[ROT]
See section 2.11.3.
2 [ADR] CANbus network address (0 to 255). Devices are listed in nu-
merical order.
[NAME] CAN Device name.
[SERIAL
CODE]
CAN device’s address claim.
[LEN] CAN device’s LEN (Load Equivalency Number).
3 Selected item
(highlighted)
Press T or S to scroll through the device list.
NORMAL
123.5 98.8
GP-D3D
17 FFFFFF 666666 23
18 HHHHHH 888888 23
47 DDDDDD 444444 21
62 AAAAAA 111111 12
65 GGGGGG 777777 211
78 CCCCCC 333333 121
129 BBBBBB 222222 23
3
2
1
Selected device’s
code
Selected device’s
unique CAN number
Selected device’s
software version
Selected device’s
mode ID
To Next Page
Loading...
