Furuno SC-130 - DISPLAY Menu; How to Change the Display Color; How to Change the Units of Measurement

2. OPERATION
2-20
2.13 DISPLAY Menu
You can customize the manner in which most items
are displayed on your screen, from the [DISPLAY]
menu.
Press the MENU ESC key, select [DISPLAY], then
press the ENT key to show the [DISPLAY] menu.
2.13.1 How To Change the Display Color
You can change the background and text color for better visibility. There are two op-
tions, White background and Black background.
The color change can be made using of the two following methods:
How to change the color from the menu
1. Open the [DISPLAY] menu.
2. Select [BKGD COLOR], then press the ENT key.
3. Select [BLACK] or [WHITE] as appropriate, then press the ENT key.
4. Close the [MENU].
How to change the color from the controls
See section 2.3.2 for details.
2.13.2 How to Change the Units of Measurement
To change the unit of measurement for distance, follow the procedure below.
1. Open the [DISPLAY] menu.
2. Select [UNIT], then press the ENT key.
3. [DISTANCE] is selected, press the ENT key.
4. Select the appropriate distance unit, then press the ENT key.
Note: The unit of measurement for speed is also changed, as shown below
• [NM]: Nautical Miles - speed shown as [kn].
• [KM]: Kilometers - speed shown as [km/h].
• [SM]: Statute Miles - speed shown as [mph].
5. Close the [MENU].
White background Black background
24º40.1234’N
104º45.5678’E
GP-D3D CAUTION
TOKYO
567/199m
05 : 16 ’ 35 21 / DEC / 15 14 : 16 ’ 35 21 / DEC / 15
9 . 6
24º40.1234’N
104º45.5678’E
GP-D3D CAUTION
TOKYO
567/199m
05 : 16 ’ 35 21 / DEC / 15 14 : 16 ’ 35 21 / DEC / 15
9 . 6