Furuno SC-60 - Erasing individual user stations; Erasing all user beacon stations

3. OPERATION
3-17
3.10.4 Erasing individual user stations
1. Press the [MENU] key to open the menu.
2. Choose DGPS and press the [ENT] key.
3. Choose STATION and press the [ENT] key.
4. Choose LIST and press the [ENT] key.
5. Choose USER and press the [ENT] key.
6. Choose a channel from the list and press the [ENT] key.
7. Choose “ERASE?”.
8. Press the [ENT] key to erase channel chosen.
3.10.5 Erasing all user beacon stations
1. Press the [MENU] key to open the menu.
2. Choose DGPS and press the [ENT] key.
3. Choose STATION and press the [ENT] key.
4. Choose LIST and press the [ENT] key.
5. Choose USER and press the [ENT] key.
6. Choose CLR? and press the [ENT] key. You are asked if it is all right to erase
all user channels.
ERASE ALL?
YES NO
ARE YOU SURE?
Prompt for erasure of all user channels
7. Choose YES and press the [ENT] key to erase all user channels.