Furuno SC-70 - Page 73

2. OPERATION
2-31
[ETHERNET] - LAN data
Select a packet, then press X to view the packet details.
[CAN] - CAN Bus network data
Select a PGN, then press X to view the PGN details.
Packet summary
Press ▲ or ▼ to
select a packet.
Selection is
highlighted in gray.
Data source’s IP address
Note: If the IP address & port combination is not a recognized combination (see section
2.15.2), the
[
ETHERNET
]
log screen appears blank.
Destination broadcast address and port
USB status
No USB = No external
flash memory connected.
SAVING = Saving log
data to external flash
memory.
STOP SAVING = Flash
memory connected, no
log data currently being
saved.
PGN source’s
unique CAN
address
PGN destination’s
CAN address
(broadcast to 255)
PGN
PGN name
PGN and name
PGN details