Furuno TZT14 - How to Set Time Zone, Language and Units

3. SETTING UP THE EQUIPMENT
3-3
6. Select [Close] at the top right-hand side of the screen to exit the menu.
(How to use the software keyboard)
3.1 How to Set Time Zone, Language and Units
Before setting up your equipment, select the time zone, language and units to use on
your equipment as shown below.
1. Press the Home key, then select [Menu] icon ( )from the menu icon bar.
2. Select [General] on the main menu to show the [Menu General] sub menus.
3. Select [[Local Time Offset]] to show the option window.
Icon Description
This icon means that menu item has some options.
Touch it to show the option window (pull-down list).
Touch the menu item with this icon to display the soft-
ware keyboard, to enter alphanumeric data. For de-
tails, see “How to use the software keyboard” shown
below.
• Shows a sub menu.
• Switches a functions ON and OFF.
• Selects a color.
Drag the circle icon to adjust the setting value.
40
Select this to switch to the
numeric software keyboard.
Select this to switch to the
alphabet software keyboard.
Numeric software keyboard
Alphabet software keyboard
Cancel
Confirm
Cancel
Confirm
Cursor (blue)
Cursor (blue)Cursor (blue)
RotoKeys
Function gesture
Connect to the Internet
Wireless LAN Settings
Local Time Offset
Base
Screen Capture
When Necessary
UTC -06:00
Allow Remote Control Full Control
Select