Furuno TZT14 - File Format

8. FILE OPERATIONS
8-2
[Export File Format]: Select the file format to use to export data, among [TZD], [CSV],
[GPX] or [KML].
[Import Points & Routes]: Import points and routes from an SD card. When you import
points and routes from an SD card, all points and routes currently stored in the TZT
unit are replaced with those on the SD card.
[Export All Points & Routes]: This unit holds 30,000 points and 200 routes in its internal
memory. When the capacity for points or routes is reached, a new point or route can-
not be entered unless an unnecessary point or route is erased. For those reasons, you
may want to export all points and routes to an SD card.
[Import Tracks]: Import tracks from an SD card. When you import tracks from an SD
card, all tracks currently stored in the TZT unit are replaced with those on the SD card.
[Export Tracks]: This unit holds 30,000 tracks in its internal memory. When the capac-
ity for tracks is reached, a new track cannot be entered unless an unnecessary track
is erased. For those reasons, you may want to export all tracks to an SD card.
[Import from NN3D]: Import points and routes from NN3D.
[Export to NN3D]: Export points and routes to NN3D.
[BackUp Settings]: Backup the settings to an SD card. This feature helps you set an-
other multi-function display with the same settings on the SD card.
[Restore Settings]: Load the saved settings from an SD card to this unit.
[Clone SD-Card]: Copy the data between SD cards.
[Clean Points, Routes & Tracks]: Delete all points, routes and tracks currently stored
in the TZT unit.
8.3 File Format
You can select the file format to use to export data.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [Files] - [Export File Format] menu.
3. Select [TZD], [CSV], [GPX] or [KML].
[TZD]: For TZT series
[CSV]: For use with NavNet 3D series
[GPX]: For use with PC plotter
[KML]: For use with PC plotter
4. Select [Close] to exit the menu.
TZD
CSV
GPX
KML
Export File Format
TZD