Furuno TZT14 - Pop-Up Menus by the FLIR Camera; How to Adjust the Video Image

9. CAMERA/VIDEO/FUSION-Link
9-6
9.4 Pop-up Menus by the FLIR Camera
[Camera FoV] menu
You can display the field of view by the FLIR camera on the plotter display.
1. Select the boat icon to display the pop-up menu.
2. Select [Camera FoV]. The circular sector in translucent red appears on the
screen.
[Move Camera] and [Lock Camera] menus
You can rotate the FLIR camera about the position you select (touch) on the plotter or
radar display. Select [Lock Camera] from the RotoKey menu. To track the position, se-
lect [Move Camera] from the RotoKey menu.
9.5 How to Adjust the Video Image
1. Select [Contrast] or [Brightness] from the RotoKey menu.
2. Drag the circle icon to adjust the setting (see the figure below).
Note: This menu is not available when [Cycle] is on (see paragraph 9.3.4).
Drag the circle icon
to adjust the setting.
50
RADAR
RADAR
DATA 2
DATA
2
DATA 1
DATA
1