Furuno TZT14 - How to Load a Weather File

11. WEATHER
11-5
1. Select [Wx Data] from the RotoKey menu on the weather display.
2. Select a menu item to display its data.
3. Repeat steps 1 and 2 to select all menu items desired.
4. Select [Anim Forecast] from the RotoKey menu. The animation forecast is dis-
played for a specified-day period. To stop the animation display, select [End Anim]
at the top right-hand corner of the screen.
You can operate the animation display with the animation bar at the bottom of the
screen.
11.2.4 How to load a weather file
You can load a weather file saved on an SD card.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Weather].
3. Select [Load Weather File].
4. Select [SD-Right] or [SD-Left].
5. Select the data to load then select [OK].
6. After the equipment has loaded the selected data, select [Close] to exit the menu.
The time scale moves.
Select to start or restart the animation display.
Select to suspend the animation display.
Select to set the time scale to the current time and display the current data.
Load Weather File
SD-Right
OK Cancel
SD-Left
ABCDEFG