Furuno TZT14 - Page 218

13. HOW TO ADJUST SETTINGS
13-7
*: These labels are replaced with the nicknames if they are set in [Camera] of the main
menu.
Menu items available in the instruments mode
How to select the RotoKey mode to use
You can select the RotoKey mode to use from [Base] or [Full].
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [General] - [RotoKeys] menu.
3. Select [Base] or [Full].
4. Select [Close] to exit the menu.
TZT9/TZT14: The [Full] set can be always selected by long pushing the RotoKey
TM
.
FLIR Home - Put the FLIR camera into the home position.
Resore the FLIR camera to the normal magnifi-
cation.
Yes Yes
Contrast - Adjust the contrast for video image. No Yes
Brightness - Adjust the brightness for video image. No Yes
Display
(TZT9/TZT14
only)
NavData Open the data boxes. No Yes
Menu Open the main menu. No Yes
Lists Open the lists. No Yes
Tide Open the tide graph. No Yes
Control label
Function Base Full
Level 1 Level 2
Steering - Show steering display. Yes Yes
Engine (If one en-
gine only)
- Show engine display. Yes Yes
Engines (If more
than one engine)
All Show all engines display. Yes Yes
Engine 1 Show engine 1 display. Yes Yes
Engine 2 Show engine 2 display. Yes Yes
Engine 3 Show engine 3 display. Yes Yes
Engine 4 Show engine 4 display. Yes Yes
Tank Level - Show tank level display. Yes Yes
Weather - Show weather display. Yes Yes
Wind - Show wind display. Yes Yes
Display
(TZT9/TZT14 only)
Menu Open the main menu. No Yes
Lists Open the lists. No Yes
Tide Open the tide graph. No Yes
Control label
Function Base Full
Level 1 Level 2
Base
Full
RotoKeys
Base