4. POINTS
4-3
[SST]: Sea surface temperature
[Date And SST]: Date and sea surface temperature
4. Select [Close] to exit the menu.
Example: [Date And SST]
Screenshot in the information area
You can display a screenshot, at the time when tapping the screen with two fingers to
put an event mark, in the information area. Select [Points] of the main menu. Select
the [ON] icon in [Add Screen Capture to Event].
To delete all screenshots for event marks in the information area, do the following:
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [Points] - [Delete All Event Pictures] menu. The confirmation message
appears
3. Select [Yes].
4. Select [Close] to exit the menu.
4.4 Default Point Settings
When you save a point, the equipment saves the point according to the shape, color,
size and type set on [Points] of the main menu. If those settings do not meet your re-
quirements, you can change the settings as shown below.
1. Select [Menu] on the menu icon bar to open the main menu.
Name
Depth
Comment
35.7 ft
73.1°F
8/7/2012 11:41:38 AM
Bearing
Range
115.5 °M
0.514 NM
Are you sure you want to delete all event pictures? Important : all Navnet TZT
have to be connected for this operation.
Yes
No
To Next Page
Loading...
