Furuno TZT16F - Example TZT16 F System Configurations

2. WIRING
2-10
does not require the 12-10P conversion cable. Connect its transducer cable directly to
the multi function display.
2.10 Example TZT16F System Configurations
Small vessels (Internal GPS, Internal Fish Finder, DRS4DL, DRS4DL+)
The example below shows a typical configuration for small vessels.
Note 1: Matching Box MB-1100 (optional supply) is required for some FURUNO trans-
ducers. See the INTERCONNECTION DIAGRAM at the back of this manual.
Note 2: Conversion cable FRU-CCN12-MJ-01 (supplied) is required for some trans-
ducers.
Radar Sensor
DRS4DL+/DRS4D-NXT
Multi Function Display
TZT16F
12 to 24 VDC
12 to 24 VDC
300W/600W/1kW
Transducer (Selectable)
2/3kW
DI-FFAMP