Furuno TZT16F - How to Set Units of Measurement

3. HOW TO SET UP THE EQUIPMENT
3-4
3.2 How to Set Units of Measurement
1. Tap the [Home] icon to show the home screen and display mode settings.
2. Tap [Settings] to show the [Settings] menu.
3. Drag the main menu to display [Units], then tap [Units].
4. Referring to the table below, set the units to show on the display.
Menu item Description Options
[Bearing Display] Adjust the bearing display format. [Magnetic], [True]
[True Wind Calculation Ref-
erence]
Set the reference for calculating
true wind speed/angle.
[Ground], [Surface]
[Position Format] Set the display format for position
(Latitude/Longitude).
[DDD°MM.mmmm’],
[DDD°MM.mmm’],
[DDD°MM.mm’],
[DDD°MM’SS.ss”],
[DDD.dddddd°],
[Loran-C], [MGRS]
[Loran C Station & GRI] Available when [Position Format]
is selected to [Loran-C].
Set Loran C station and GRI com-
bination.
[Short/Long Change Over] Set the distance at which to
change between short and long
range.
[0.0] to [2.0] (NM)
[Range (Long)] Set the unit of measurement for
long distances.
[Nautical Mile], [Kilometer], [Mile]
[Range (Short)] Set the unit of measurement for
short distances.
[Foot], [Meter], [Yard]
[Depth] Set the unit of measurement for
depth.
[Foot], [Meter], [Fathom], [Passi
Braza]
[Height/Length] Set the unit of measurement for
height and length.
[Foot], [Meter]
[Fish Size] Set the unit of measurement for
fish sizes.
[Inch], [Centimeter]
[Temperature] Set the unit of measurement for
temperature.
[Fahrenheit Degree], [Celsius De-
gree]
[Boat Speed] Set the unit of measurement for
boat speed.
[Knot], [Kilometer per Hour], [Mile
per Hour], [Meter per Second]
[Wind Speed] Set the unit of measurement for
wind speed.
[Knot], [Kilometer per Hour], [Mile
per Hour], [Meter per Second]
[Atmospheric Pressure] Set the unit of measurement for
atmospheric pressure.
[HectoPascal], [Millibar], [Millime-
ter of Mercury], [Inch of Mercury]
[Oil Pressure] Set the unit of measurement for
oil pressure.
[KiloPascal], [Bar], [Pound per
Square Inch]
[Volume] Set the unit of measurement for
tank volume.
[Gallon] (Gallon & Gallon/hour),
[Litre] (Litre & Litre/hour)
[Reset Default Settings] Restore default unit settings. [OK], [Cancel]