12
1.7 VHF Interface Unit IF-5200 (option)
Mounting
Fix the unit using 4x20 self-tapping screws. Remove the cover to access to holes. When a
non-FURUNO VHF is connected to the unit, using the terminal board, remove unused wires
and connectors. Otherwise, noise problem may arise.
Audio level is adjusted by DIP switches in the interface unit after installation. See paragraph 3.1.
217
116
±
0.5
176
±
0.5
NAMEPLATE
4-
φ
5
(FIXING HOLES)
#50
#50
148
94
Mounting dimensions of VHF interface unit
To Next Page
Loading...
