EasyManua.ls Logo

Furuno VR-7000 - 2.18 Sensor (LAN)

Furuno VR-7000
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. MAINTENANCE
2-14
Self test
1. Open the test menu.
2. Use the cursorpad ( or ) to select [Self Test] then press the ENT key.
Note: The self test screen closes automatically when there is no menu operation
for 60 seconds.
3. Press each key one by one. A key’s corresponding location on the display is col-
ored if the key is normal.
4. Press the MENU key three times to close the self test screen.
LCD test
1. Open the test menu.
2. Use the cursorpad ( or ) to select [LCD Test] then press the ENT key. Each
press of the ENT key changes the LCD pattern in the sequence shown below.
Note 1: The LCD test screen closes automatically when there is no menu opera-
tion for 60 seconds.
Note 2: You can cancel the test at any time by pressing the MENU key.
3. Press the MENU key to close the LCD test screen.
Self Test
Push
[
MENU/ESC
]
3 time to exit
ROM : OK RAM: OK
Connection : OK
CPU Main : 2450103-01.XX
CPU Boot : 2450108-01.XX
Red Green Blue
16 tones of red
16 tones of green 16 tones of blue
16 tones of grayWhite Black

Other manuals for Furuno VR-7000

Related product manuals