1. MOUNTING
1-31
• The unit should be 4 m or more away from the VHF/MF/HF antennas.
Mounting
Install the junction box on a bulkhead or desktop with four M10 bolts or I10 coach bolts
(local supply).
1.13 Junction Box IF-8540 (Option)
A maximum of six sensor adapters can be installed in the junction box (MC-3000S in-
cluded). The units installed in the junction box change depending on the configuration
purchased.
For the mounting and wiring procedures, see the Installation Instruction supplied with
the IF-8540 (Pub. No.C42-01504).
Fixing hole
㩿
four locations
㪀
To Next Page
Loading...
