Furuno VR-7000 - 1.4 How to Connect a PC to the VR-7000; 1.5 How to Start the VDR Maintenance Viewer

1. INSTALLATION
1-7
1.4 How to Connect a PC to the VR-7000
Open the door on the cover of the DCU. Connect the LAN cable (supplied) between
the DATA port J502 in the DCU and the LAN port on the PC.
1.5 How to Start the VDR Maintenance Viewer
Windows
®
7: [Start] button > [All Programs] > [VR-7000] > [MaintenanceViewer]
Windows
®
8: [Start] screen > Right click a blank part of screen then select [All Apps]
> click “VR-7000”
Windows Vista
®
: [Start] button > [All Programs] > [VR-7000] > [MaintenanceViewer]
Windows
®
XP: [Start] button > [All Programs] > [VR-7000] > [MaintenanceViewer]
Note 1: When a symptom shown below occurs, reboot the Maintenance Viewer.
Note 2: If the PC requests a restart while the Live Player is starting up, do one of the
following to restore normal operation. (The procedure may be slightly different de-
pending on your OS.)
• A Java
®
7.25 related error occurs and Maintenance Viewer shuts down.
• The Maintenance Viewer shuts down when maximizing or minimizing a dialog box.
• The error message "[OPERATION] Processing speed decrease. It has already start-
ed. [1 process]" appears.
• The track list does not appear (source selected from [Source Select] window; [Ana-
lyze] button clicked) after several minutes.
• Open the Task Manager then select the [Processes] tab. Check [Show processes
from all users]. Select “rserv.exe”, then click the [End Process] button. “rserv.exe” is
then automatically restarted.
• Restart the PC.
LAN
cable
DCU
PC
Data port
J502
LAN port