2. SOFTWARE CONFIGURATION
2-25
2.14 Software
The [Software] tab sets and display software-related operations.
How to set up software related operations
1. Click the [Software] tab.
2. Set up the chosen Item from the [Setting] window.
3. Click the [Set] button.
Note: Program numbers may be different from your own.
Description of the items in the Setting window
[VDR System Program]: VDR system program no.
[Process Version]: Processor version no.
[Power Distribution Unit(PDU)]: Power Distribution Unit version no.
[Operation System]: Program no. of operation system.
[RAP Version]: Enter the version no. of the RAP.
[Video LAN Converter Version]: Enter the version no. of the Video LAN Converter.
[Audio Interface Board Version]: Enter the version no. of the audio interface board.
[JB1: RJB Boot Program]: Display the no. of the RJB Boot program for Junction Boxes.
[JB1: RJB App Program]: Display the no. of the RJB App program for Junction Boxes.
[WatchDog Interval]: Do not change the default value of 60. (Enter the process re-
sponse time. A process is repeated if there is no response within the time interval set
here.)
[Giveup Interval]: Do not change the default value of 300. (Enter the restart watch time.
The restarting of a process is stopped when the number of times it has been restarted is
exceeded within the interval set here.)
[Refork Limit]: Do not change the default value of 10. (Enter the upper limit for process
restart. The restarting of a process is stopped when the number of times it has been re-
started exceeds the [Give up Interval].)
[Note]:
Enter remarks. (Entry optional.)
To Next Page
Loading...
