1. INSTALLATION
1-2
Install the software
1. Insert the program CD into the CD drive.
2. Run view.exe on the program CD to show the Setup-VR-7000 dialog box.
3. Click the [Next] button.
4. Confirm that the install location is “C:\Program Files\FURUNO” then click the
[Next] button.
5. Click the [Yes] button.
6. Click the [Next] and [Install] buttons to install the software.
7. After the installation is completed, the message “Yes, restart computer now” is
checked. Click the [Finish] button to complete the installation and restart the PC.
Grant administrator access
Full administrator access is necessary to install and run the Maintenance Viewer pro-
gram. Grant administrator access as follows:
1. Right click on the program shortcut then click [Properties].
2. In the [Properties] window, go to the [Compatibility] tab.
3. At [Privilege Level], check [Run this program as an administrator] then click the
[OK] button.
1.2.2 Windows
®
8
Deactivate the firewall
Deactivate the firewall to install and operate the Maintenance Viewer.
1. Login to Windows
®
8 user account.
2. Point mouse to lower right corner of the screen to display a sidebar.
3. Click the [Control Panel] option on the sidebar to open the Control Panel.
4. Click the [System and Security] option then click [Windows Firewall].
5. Click [Turn Windows Firewall on or off] at the left side of the window.
6. Click the radio button [Turn off Windows Firewall (not recommended)] under both
the private and public network settings.
7. Select [OK].
If you try to use the Maintenance Viewer with the firewall active, VDR settings cannot
be downloaded or updated.
To reactivate the firewall, click [Turn on Windows Firewall] at step 6 in the procedure.
Install the software
1. Insert the program CD into the CD drive.
2. Run view.exe on the program CD to show the Setup-VR-7000 dialog box.
3. Click the [Next] button.
4. Confirm that the install location is “C:\Program Files\FURUNO” then click the
[Next] button.
* Folder name for 32 bit. “Program Files(x86)” for 64 bit.
5. Click the [Yes] button.
To Next Page
Loading...
