1. INSTALLATION
1-3
6. Click the [Next] and [Install] buttons to install the software.
7. After the installation is completed, the message “Yes, restart computer now” is
checked. Click the [Finish] button to complete the installation and restart the PC.
Grant administrator access
Full administrator access is necessary to install and run the Maintenance Viewer pro-
gram. Grant administrator access as follows:
1. Right click on the program shortcut then click [Properties].
2. In the [Properties] window, go to the [Compatibility] tab.
3. At [Privilege Level], check [Run this program as an administrator] then click the
[OK] button.
1.2.3 Windows Vista
®
Deactivate the firewall
1. Click the [Start] button.
2. Click [Control Panel], [Security] and [Windows Firewall].
3. Choose [Turn Windows Firewall on or off].
4. Select [Off (not recommended)]. Click [OK].
If you try to use the Maintenance Viewer with the firewall active, VDR settings cannot
be downloaded or updated.
To reactivate the firewall, click [On] at step 4 in the procedure.
Install the software
1. Insert the program CD into the CD drive.
2. Run view.exe on the program CD to show the Setup-VR-7000 dialog box.
3. Click the [Next] button.
4. Confirm that the install location is “C:\Program Files\FURUNO” then click the
[Next] button.
5. Click the [Yes] button.
6. Click the [Next] and [Install] buttons to install the software.
7. After the installation is completed, the message “Yes, restart computer now” is
checked. Click the [Finish] button to complete the installation and restart the PC.
Grant administrator access
Full administrator access is necessary to install and run the Maintenance Viewer pro-
gram. Grant administrator access as follows:
1. Right click on the application's shortcut icon.
2. Select [Properties] on the menu.
3. Click the [Advanced] button under the Shortcut tab in the dialog box.
4. Check the [Run as administrator] box.
5. Click the [OK] button
6. Finish by clicking [Apply ]and then [OK].
To Next Page
Loading...
