FUTABA 4PK-2.4G SuperR - Data Transfer DTTRN

Connect the communication
port of both T4PKSR with
the optional DSC cord.
Communication port (interior
left side)
Cover
DSC cord for T4PKSR (option)
126
Function
(Opening Screen)
MENU 1
Press t
he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he button
* When the direct call button
is set, the setup screen is also
called by the following method:
•Select the setting item by
button
*
blinks at the current
setup item.
(Preparation)
- Connect the communication port of both transmitter with the
optional DSC cord.
1
Set the power switch of both transmitter to the display (DISP
ON) side.
Use the (JOG) button and (+) button to display the " DT-TRN "
at both transmitter.
Using the Data Transfer function
When the "DT-TRN" menu
is selected when the trans-
mitter power switch is at
the transmit (PWR ON)
side, the message shown
below prompting you to set
the switch to the display
side is displayed.
Data transfer side
Data receive side
Transmitter type
(Data receive side)
Data Transfer "DTTRN"
This function copies the model memory data of one T4PKSR to another T4PKSR. Data
exchange with a T4PK Super is also possible, but functions not provided at the T4PK Su-
per are not copied. Connect the communication port of both T4PKSR with the optional
DSC cord. Use with this function with the T4PKSR power switch at the display side.
Data Transfer "DTTRN"
•Select the setting item by button
*
blinks at the current setup item.
Data is not interchangeable with T4PK.