FUTABA 4PK-2.4G SuperR - Throttle Speed THSPD

1 SPEED
A delay is set over the entire
throttle range.
2 SPEED
A delay can be set in 2 ranges
with TGP1 as the boundary.
3 SPEED
A delay can be set in 3 ranges with
TGP1 and TGP2 as the boundaries.
TGP1
high
neutral
high
neutral
high
neutral
TGP2 TGP1
ALL
LOW
HIGH
LOW
HIGH
MID
63
Function
(Opening Screen)
MENU 1
Press t
he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t
he button
* When the direct call button
is set, the setup screen is also
called by the following method:
•Select the setting item by
button
*
blinks at the current
setup item.
With "THSPD": Quick start without skidding
Without "THSPD": Slow start due to skidding
-Throttle servo (ESC) operation is delayed so that the drive wheels will not spin even
if the trottle trigger is operated more than necessary. This delay function is not per-
formed when the throttle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
Operation
Throttle Speed "THSPD"
Mode selection
One speed, 2 speed, or 3 speed can be selected at the "MODE"
item. The setting item (screen) depends on the mode. The gure at
the above is the 3 speed setup screen.
Throttle Speed "THSPD"
(Throttle system)
Sudden throttle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.