FUTABA 4PL-2.4GHZ - Page 58

58
Function
Throttle Acceleration "ACCFW/ACCBK"
(Preparation)
- On the THROTTLE 1 screen, display the
THROTTLE 2 screen by (UP) or (DN) button
and make the following adjustments:
1
(Forward acceleration amount adjustment)
Select the setting item "ACCFW" by (UP) or (DN) button and
use the (+) and (-) buttons to adjust the acceleration amount.
"0" :No acceleration
"100" :Maximum acceleration (Approximately 1/2 of the forward side
throttle angle)
2
(Brake side acceleration amount adjustment)
Select the setting item "ACCBK" by (UP) or (DN) button and
use the (+) and (-) buttons to adjust the acceleration amount.
"0" :No acceleration
"100" :Maximum acceleration (Brake side maximum throttle angle)
4
When ending, return to the menu screen by pressing the (CT)
button.
Throttle acceleration adjustment
The throttle acceleration adjustment amount (ACCFW), (ACCBK) can be controlled
with digital dial or digital trim. With the function select dial function. (See page 60)
Dial / Trim Setting
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Forward acceleration amount
(ACCFW)
0~100
Initial value: 0
Brake side acceleration amount
(ACCBK)
0~100
Initial value: 0