51
(14) Pit.
High: Pitch high memorizing
This parameter saves the full positive collective pitch point into the
CGY760R. Move the cursor to "Pit. High" by pressing the [
/+] or [ /-]
key. Press the [Enter] key to enter the setting mode. "EXECUTE: Enter
(1sec)" is displayed. Move the collective pitch stick to full positive pitch
and pressing the [Enter] key for about 1 second. The full positive pitch
signal will be saved to the CGY760R.
(15) Pit. Zero: Pitch zero memorizing
This parameter saves the full positive collective pitch point into the
CGY760R. Move the cursor to "Pit. Zero" by pressing the [
/+] or [ /-]
key. Press the [Enter] key to enter the setting mode. "EXECUTE: Enter
(1sec)" is displayed. Move the collective pitch stick to
0 degree pitch
and pressing the [Enter] key for about 1 second. The full positive pitch
signal will be saved to the CGY760R.
(16) Pit. Low: Pitch low memorizing
This parameter saves the full negative collective pitch point into the
CGY760R. Move the cursor to "Pit. Low" by pressing the [
/+] or [ /-]
key. Press the [Enter] key to enter the setting mode. "EXECUTE: Enter
(1sec)" is displayed. Move the collective pitch stick to full
negative
pitch and pressing the [Enter] key for about 1 second. The full positive
pitch signal will be saved to the CGY760R.
Go to the menu title of
SWH BASIC screen 1/5
To Next Page
Loading...
Need help?
General
