FUTABA GPB-1 Instruction Manual

86
SWH. DETAIL screen 7/7
From 6/7
Go to 1/7 from any cursor position
(16) RESET : Swash detail data reset
This resets the "SWH.DETAIL" setting back to the defaults. Move the cur-
sor to "RESET" by pressing the [
/+] or [ /-] key. Press the [Enter] key to
enter the reset mode. When "EXECUTE: Enter (1sec)" is displayed, press
and hold the [Enter] key for about 1 second to initialize "SWH.DETAIL"
setting. If you do not wish to reset, press either the [Enter] key or [Esc/
Page] key to exit reset mode.
Go to the menu title of SWH. DETAIL screen 1/7

FUTABA GPB-1 Specifications

General

Brand	FUTABA
Model	GPB-1
Category	Science Education products
Language	English