1. Startup homepage: The startup homepage includes the satellite
quantity, power of remote controller and boat power percentage. The
sailing direction will be displayed in real time at the left up corner and
the signal strength of the remote control will be displayed at the top
right corner.
2. Set the origin: After the boat arrives at the fishing field, first set the
origin as follows:
Homepage (down key) → origin homepage (hold Ok key) →
prompt to select “OK” →Save successfully (set the origin
successfully)
3. Position point saving function, manual and automatic function: When
any position point is saved, the manual function indicates to arrive at
the position point via manual operations on the graphic navigation.
The automatic function indicates to automatically drive the boat to the
position point. Operations are described as follows:
To Next Page
Loading...
