Future Design xplode - Page 14

xplode
INSTRUCTION FOR USE EN
13
7. ADJUST THE HANDLE BAR
Press the adjustable handle bar buttons on both sideS of the push bar
at same time, then you can adjust the push bar, and adjust the handle bar
in 5 dierent positions.
8. ADJUST THE BACKREST
Pull up the plastic button on the back of the backrest and adjust the
backrest to any of 3 avilable positions (sleeping or seat).
9. ADJUST THE FOOTREST
Press the plastic buttons on back sides of the footrest to adjust it iup or down.
10. FOLD THE STROLLER
Press the second lock, pull out and up the polypropylene ribbon hidden
in the seat to fold the stroller until frame locks folded.
11. ADJUST THE SUSPENSION
The suspension have two position: soft and hard.
• Switch the suspension adjustable button to right to make the suspension
soft.
• Switch the suspension adjustable button to left to make the suspension
hard.
12. USE THE SAFETY BUCKLE
There are 2 position for safety belt, the up position is suitable for one baby
more than 6 months, the bottom position is suitable for one baby under than
6 months.
Click the buckle to lock the safety belt on both sides. Press the middle button
to release the safety belt. You can adjust the length of the seat belt by pulling
the safety buckle on both sides as needed.
USAGE