36
Battery Pack and Charger
Damp areas can cause corrosion of terminals and electrical contacts. If stored for long
periods in high temperatures (120° F / 50° C), permanent damage to the battery pack
can result. Check electrical terminals and contacts on battery packs and charger. Wipe
with clean cloth or blow clean with compressed air. After storage, a normal charge may
be required. To check available charge, press the Battery Fuel Gauge button and
charge if required. See the Battery Fuel Gauge section.
Tyre pressure:
Check the tyre pressure prior to starting!
The correct tyre pressure is 1.5 bar in the front wheels and 1.8 bar in the rear wheels.
Important: If the tyre pressure is too low, the risk of damage to the valves and therefore
the hoses increase.
Repairs After any repair or maintenance work, check that all safetyrelated parts are in
place and in proper working order. All parts which may cause injury must be kept where
they are inaccessible to children or others. Important: In accordance with product
liability legislation, we are not liable for any damages caused by improper repairs or
the use of spare parts that are not original spare parts or parts approved by us. In
addition, we are also not liable for any damages arising from improper repairs. Such
work should be performed by a customer services workshop or authorized specialist.
The same applies to accessory parts.
Service information
Please note that the following parts of this product are subject to normal or natural
wear and that the following parts are therefore also required for use as consumables.
Wear parts*: Spark plug, air filter, petrol filter, blade, vbelt, battery, blade, tyres
* Not necessarily included in the scope of delivery
10.Storage
Store the device and its accessories in a dark, dry and frostfree place that is
inaccessible to children. The optimum storage temperature lies between 5 and 30 ˚C.
Store the operating manual with the tool.
• Never store the machine with petrol in the tank inside a building in which fuel vapors
may come into contact with naked flames or sparks
• Allow the engine to cool before storing it.
• In order to reduce the risk of fire, keep the engine, exhaust, battery box and the area
To Next Page
Loading...
