- 14 -
Wear heavy gloves to protect your hands.
z Remove the bolt with a socket wrench. Use a wooden block to prevent the blade from turning when
removing the bolt. Then remove the blade.
z Install the blade using the blade bolt and special washers. Be sure to install the special washers with
the concave side toward the blade and the convex side toward the bolt.
z Tighten the blade bolt with a torque wrench. Use a wooden block to prevent the blade from turning
when tightening the bolt.
Grass catcher cleaning and replacement
- Cleaning
Wash the bag with a garden hose, and allow it to dry completely before use; a wet bag will clog quickly.
- Replacement
z Unclip the plastic edges of the bag from the frame; remove the frame from the bag.
z Insert the frame into the bag; clip the plastic edges of the bag onto the frame.
Engine Maintenance
- Check Engine Oil Level
Check the engine oil level with the engine stopped and the mower.
z Remove the oil filler cap, and wipe the dipstick clean.
z Insert the dipstick into the oil filler neck, but do not screw it in.
To Next Page
Loading...
