Why do my FXLuminaire Luxor ZD fixtures work on the controller but not the app?
If your FXLuminaire Lighting Equipment fixtures operate correctly from the controller but not from the app, this could be due to low Wi-Fi signal strength at the controller. Try elevating the network router for a better signal or adding a Wi-Fi booster to increase the signal at the controller.
Why does my FXLuminaire Lighting Equipment Luxor keep losing network connection?
If the Luxor controller for your FXLuminaire Lighting Equipment keeps disconnecting from the network, it might be due to a weak Wi-Fi signal. Try elevating your network router to improve the signal, or consider adding a Wi-Fi booster to strengthen the signal at the controller.
What to do if my FXLuminaire Luxor ZD app won't connect to Luxor?
If your FXLuminaire Lighting Equipment app won't connect to Luxor, it could be that either the device, the controller, or both are not connected to the wireless network. Ensure that your device is connected to the correct network.
General| Category | Lighting Equipment |
|---|---|
| Compatibility | FXLuminaire LED Fixtures |
| Warranty | 10 years |
| Zones | 250 |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
To Next Page
