2
Table of Contents
3
Luxor Controller Overview
3 Luxor Controller Components
4 Glossary of Terms
4 Safety Information
5 Installing the Luxor
Transformer
5 Locating the Transformer
5 Mounting the Transformer
8 Running Cable to the Fixtures
10 Low-Voltage Cable
10 Cabling Methods
10 Connecting Cables at the Terminal
Block
11 Operating the Luxor
Controller
11 Navigating the Luxor Controller
11 Home Screen
12 Activity Screen
12 Diagnostics Screen
13 Setup Screen
13 Time/Date
14 Language
14 Location
15 Assign
15 Network
16 Backup
16 How to Restore an Existing File
17 Assigning Light Fixtures into Groups
18 Setting Up Programs
19 Calendar-Based Programming
19 Themes
20 Manual Mode
21 Color
21 Color Palette
22 Color Wheel
23 Mixing FX Luminaire LED, ZD
Technology,
and ZDC Technology
24 Using Other Devices with the Luxor
Controller
25 Disable
26 Luxor Linking Setup
26 Updating to Luxor Linking
27 Wired Connection for Satellite
Controllers
28 Chassis Communication and
Assignment
28 Wireless Communication and
Assignment
29 Care and Maintenance
29 Regular Preventive Maintenance
30 Troubleshooting
31 Firmware Updates
33 Fuse Replacement
34 System Reset
34 Facepack Reset
35 Database Reset
35 Chassis Indicator Lights
36 Warranty
38 Notes
41 Fixture Group Stickers*
*Use the stickers attached to the back of this guide to simplify group assignments when programming xtures at the Luxor Controller
facepack or with the Light Assignment Module.
To Next Page
Loading...
