STEP 1 – PASO 1 - ETAPE 1 - FASE 1 - STEP 1 – STAP 1: SUPPORT FRAME
1. Take out the main frame from the package box and put it onto the paperboard, and clear the fittings.
2. Use 2pcs M8*20 and 2pcs M8X55 screws and fix them onto the stand pipe with washers.
STEP 2 – PASO 2 - ETAPE 2 - FASE 2 - STEP 2 – STAP 2:
Raise the computer panel while check the signal connection, and insert 2pcs M8×20 screws with washers to fasten it.
To Next Page
Loading...
